Menu
Your Cart

Acrylic Systems Slow Cure - Cold Mounting by Metallurgical Supplies

Acrylic Systems Slow Cure - Cold Mounting by Metallurgical Supplies

Acrylic Systems Slow Cure - Cold Mounting

Acrylic Systems Slow Cure - Cold Mounting - by Metallurgical Supplies a Metallography World Corporation

META-ACRYL-SL SLOW CURE ACRYLIC SYSTEMS - COLD MOUNTING SUPPLIES FOR SAMPLE PREPARATION

Download Acrylic Cold Mounting Brochure Guide

META-ACRYL-SL 

SLOW CURING ACRYLIC SYSTEM

META-ACRYL-SL Crystal clear transparency slow cure 30-45min cure time. Also unlike epoxy resins, the ratio of the various acrylic parts (powder to liquid) can be altered by up to 25% with no adverse effect to the final properties of the mount. This is because both the liquid and powder are acrylics with various additives and curing agents. The advantages of mounting with acrylics resins include:  - Rapid mounting - Very repeatable and consistent mounts - Moderate shrinkage - Good hardness - Semi-transparent - High odor

Mixing Ratios Thoroughly Tested For Best Results. 

The mixing ratios were done with a scale or scoops:

SAMPLE TEST #1
USING Scale
20 gr : 30 gr
3 minutes prep time
30-40 minutes cure time

SAMPLE TEST #2
USING Scale
1.5 gr : 2 gr
3 minutes prep time
30-40 minutes cure time

SAMPLE TEST #2
USING Scoops
20 gr : 20 gr
3 minutes prep time
35-55 minutes cure time

  

Cold Mounting systems are recommended for mounting specimens that are sensitive to high pressures and temperatures. Epoxy products provide good physical adherence, low shrinkage, and excellent infiltration into pores.

Acrylic Systems - Cold Mounting
Glass Filled Acrylic Systems - Cold Mounting
Acrylic Systems Slow Cure - Cold Mounting
Acrylics are easy-to-use resins with short curing times, minimal shrinkage, and excellent mounting properties. They are well-suited for both serial mountings of irregularly shaped specimens and for routine work or single specimens. Acrylics are available with and without a mineral filler. The dye can be used if color coding is needed. When mixing acrylic resins, it is recommended to add powder to the liquid (hardener) – this will result in the most uniform resin mixture. - Castable acrylics are easy to use and are very robust. The main advantage of mounting with castable acrylics is the fast curing time. Depending upon the mixing ratio, castable acrylic mounts are typically ready to use within 8-15 minutes. Also unlike epoxy resins, the ratio of the various acrylic parts (powder to liquid) can be altered by up to 25% with no adverse effect to the final properties of the mount. This is because both the liquid and powder are acrylics with various additives and curing agents. By varying the ratio of the liquid to powder, the curing time and viscosity can be altered. The powder contains a catalyst that reacts with the liquid hardener to start the curing process. Fillers are added to increase hardness and to reduce shrinkage.
Features of Acrylics :

  • Rapid mounting
  • Very repeatable and consistent
  • Moderate shrinkage
  • Good hardness
  • Semi-transparent
  • High odor

Acrylics main advantage of mounting with castable acrylics is the fast curing time. Depending upon the mixing ratio, castable acrylic mounts are typically ready to use within 8-15 minutes. Also unlike epoxy resins, the ratio of the various acrylic parts (powder to liquid) can be altered by up to 25% with no adverse effect to the final properties of the mount. This is because both the liquid and powder are acrylics with various additives and curing agents. The advantages of mounting with acrylics resins include:  - Rapid mounting - Very repeatable and consistent mounts - Moderate shrinkage - Good hardness - Semi-transparent - High odor

 

 
Brand: Metallography World Corporation Model: META-ACRYL-SL-KIT
META-ACRYL-SL SLOW CURING ACRYLIC SYSTEM META-ACRYL-SL Crystal clear transparency slow cure 30-45min cure time. Also unlike epoxy resins, the ratio of the various acrylic parts (powder to liquid) can be altered by up to 25% with no adverse effect to the final properties of the mount. This is because..
Brand: Metallography World Corporation Model: META-ACRYL-SL-KIT2
META-ACRYL-SL SLOW CURING ACRYLIC SYSTEM META-ACRYL-SL Crystal clear transparency slow cure 30-45min cure time. Also unlike epoxy resins, the ratio of the various acrylic parts (powder to liquid) can be altered by up to 25% with no adverse effect to the final properties of the mount. This is because..
Brand: Metallography World Corporation Model: META-ACRYL-SL-R1
META-ACRYL-SL SLOW CURING ACRYLIC SYSTEM META-ACRYL-SL Crystal clear transparency slow cure 30-45min cure time. Also unlike epoxy resins, the ratio of the various acrylic parts (powder to liquid) can be altered by up to 25% with no adverse effect to the final properties of the mount. This is because..
Brand: Metallography World Corporation Model: META-ACRYL-SL-R5
META-ACRYL-SL SLOW CURING ACRYLIC SYSTEM META-ACRYL-SL Crystal clear transparency slow cure 30-45min cure time. Also unlike epoxy resins, the ratio of the various acrylic parts (powder to liquid) can be altered by up to 25% with no adverse effect to the final properties of the mount. This is because..
Brand: Metallography World Corporation Model: META-ACRYL-SL-R10
META-ACRYL-SL SLOW CURING ACRYLIC SYSTEM META-ACRYL-SL Crystal clear transparency slow cure 30-45min cure time. Also unlike epoxy resins, the ratio of the various acrylic parts (powder to liquid) can be altered by up to 25% with no adverse effect to the final properties of the mount. This is because..
Brand: Metallography World Corporation Model: META-ACRYL-SL-R25
META-ACRYL-SL SLOW CURING ACRYLIC SYSTEM META-ACRYL-SL Crystal clear transparency slow cure 30-45min cure time. Also unlike epoxy resins, the ratio of the various acrylic parts (powder to liquid) can be altered by up to 25% with no adverse effect to the final properties of the mount. This is because..
Brand: Metallography World Corporation Model: META-ACRYL-SL-H16
META-ACRYL-SL SLOW CURING ACRYLIC SYSTEM META-ACRYL-SL Crystal clear transparency slow cure 30-45min cure time. Also unlike epoxy resins, the ratio of the various acrylic parts (powder to liquid) can be altered by up to 25% with no adverse effect to the final properties of the mount. This is because..
Brand: Metallography World Corporation Model: META-ACRYL-SL-H32
META-ACRYL-SL SLOW CURING ACRYLIC SYSTEM META-ACRYL-SL Crystal clear transparency slow cure 30-45min cure time. Also unlike epoxy resins, the ratio of the various acrylic parts (powder to liquid) can be altered by up to 25% with no adverse effect to the final properties of the mount. This is because..
Brand: Metallography World Corporation Model: META-ACRYL-SL-H64
META-ACRYL-SL SLOW CURING ACRYLIC SYSTEM META-ACRYL-SL Crystal clear transparency slow cure 30-45min cure time. Also unlike epoxy resins, the ratio of the various acrylic parts (powder to liquid) can be altered by up to 25% with no adverse effect to the final properties of the mount. This is because..
Brand: Metallography World Corporation Model: META-ACRYL-SL-H128
META-ACRYL-SL SLOW CURING ACRYLIC SYSTEM META-ACRYL-SL Crystal clear transparency slow cure 30-45min cure time. Also unlike epoxy resins, the ratio of the various acrylic parts (powder to liquid) can be altered by up to 25% with no adverse effect to the final properties of the mount. This is because..
Showing 1 to 10 of 10 (1 Pages)
0
false
false
Remove
Change
Notification Module
This is the sticky Notification module. You can use it for any sticky messages such as cookie notices or special promotions, etc.